[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC High Voltage Holiday Detector or porosity test provides accurate detection of pinholes, flaws, inclusions, thin spots and bubbles in a coating. The gauge has been specifically designed to revolutionise high voltage DC testing of coatings, making it safer, easier and more reliable than previously possible. n nThe high […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nRugotest no. 3 comparison standard for blasted surfaces consisting of 6 examples of grit-blasting and 6 examples of shot-blasting. The method complies with ASTM D 4417/A. Supplied with a case. n nStandards: ASTM D4417 n n[/su_expand]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. The dust test kit can be used in […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nSurface Roughness Tester SJ-210 offers a choice of 39 roughness parameters (according to DIN EN ISO, VDA, JIS, ANSI, MOTIF and freely selectable variables) and a probe geometry according to DIN EN ISO 3274: 2 ìm / 60 ° (recommended). The device has an incredibly simple intuitive menu navigation on […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nComparison standard according to ISO 8503 part 1 made of quality steel. Indicates the surface condition of blasted steel according to ISO 8503 in grades of fine, medium, and coarse. n n nCan be used in accordance with ASTM D4417 Method A, ISO 8503-1, ISO 8503-2 n n nStandards: ASTM […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Sheen Surface Profile & Coating Thickness gauge is a combination gauge. that can be equipped with two different tips, one for surface roughness and another for coating thickness. n nSupplied with a sharp tungsten carbide replaceable tip for surface profile measurement, a hardened round tip for coating thickness […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Low Voltage Pinhole detector enables the user to inspect various coatings on conductive substrates for small defects such as holidays and pinholes using the ‘wet sponge technique’. n nThe grounding clamp is connected to an untreated piece of the substrate (which is electrically connected with the measurement area), […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nTQC Sheen Permeability cups for determining the water-vapor transmission of paints, varnishes, coatings, coating systems and related products. The Permeability cup consists of a cup, seal ring and cover ring. The seal ring is designed to prevent turning when closing the cover. The Permeability cup is suitable for testing both […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Karsten Tube Penetration Test is a simple test for measuring the degree or water penetration into building materials such as concrete, stone and plaster. The test consists or a glass tube filled with water, bonded to the test material with plastiline. Water pressure is then exerted on the […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Sheen Concrete moisture meter is a non-destructive moisture meter for concrete. By means of measuring the electrical impedance the moisture content of concrete can easily be determined by just pressing the instrument against the concrete surface. n nThe electrical impedance is measured through generating a low frequency electric […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe Bresle Kit – Sodium Chloride Test Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water and a conductivity gauge. The conductivity is mainly directly proportional to the […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe Pretreatment Test Kit is especially composed to control all relevant parameters during the pretreatment of steel prior to painting. The PTK is available as BASIC KIT and FULL KIT. n nThe strong double walled suitcase holds a smart selection of inspection tools and measuring devices to assist the paint […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n n nThe TQC Dew Point calculator is a handy tool to determine dew point temperature based upon the measurements from the sling psychrometer. n nIncludes a Celsius / Fahrenheit converter. n n n n n[/su_expand]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Sheen DewCheck 4 – Dewpoint Meter (DPM)/ Dewmeter is an extremely versatile dewpoint meter to measure and record all climate parameters required to treat surfaces. This easy to use and robust dewmeter conforms to ISO 8502-4 & ASTM D3276-07 and measures the relative humidity (%RH), ambient temperature (Ta) […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Sheen Ultrasonic thickness gauge specifically designed to measure the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastics, ceramics, glass and plastics. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion. The gauge […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nTQC Sheen Gel Strength Tester (414N) is especially suited to assess the yield strength and consistency of thick paints and other materials such as gels and putties etc. n nA 250 ml can containing the sample is magnetically fastened onto the turntable of the Gel Strength Tester. This turntable is […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nTQC Sheen portable precision Glossmaster TRI 20/60/85° for production and laboratory. Suitable for paint and coatings, plastics, automotive parts etc. n nWith three angles and a new high-resolution colour display in one robust, lightweight, portable package the Tri-Glossmaster easily tackles most gloss measurement applications. n n Simple to operate – […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThis modern TQC Sheen KU Viscometer provides automated motor operation, without weights & pulley, allowing accurate direct reading in KU (Krebs units), mPa.s (cP) or g (gram). n nBased on the popular traditional KREBS method, using a weight-driven rotating paddle to sense the paint viscosity at a constant 200 rpm, […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe Cone and Plate Viscometer is a standard test for dynamic viscosity measurements. As non-Newtonian fluids exhibit different viscosities relative to the shear rate applied, the Cone and Plate Viscometer tightly controls it to 10,000S-1 (B.S./ ISO requirements) or to 12,000S-1 (ASTM). n nIt is faster and more accurate by […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe Sag Index Applicator is especially designed for sag resistance evaluation. The total film width of 90mm is equally divided into 10 gaps, incremented in depths of 25µm. The space between each gap is 1.5mm. n nThe application of the coating is the same as for standard bar applicators, but […]
N/A
Product successfully added to the Quote List
Surface Roughness Gauge
<h2>TQC Sheen Surface Profile and Coating Thickness Gauge</h2>
CurveX 3 Standard Oven Temperature Data Logger Kit
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nSuited for industrial oven and laboratory oven temperature profiling. n nProfiling an industrial powder coating oven starts right here with the CurveX 3 Standard Oven Logger KIT. It contains all necessary items, just add the desired magnetic or clamp-type probes to make the oven logger KIT complete. n nThe heart […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe CurveX 3 Basic is an oven recorder designed for everyday use in powder coating lines. n nIt’s a 4-channel temperature data logger built in a sturdy machined aluminium case that fulfills the basic needs for quality control in powder coating applications. Its ease of use and affordable price level […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nTQC offers a wide range of sensors suitable for measuring the oven CurveX system. All sensors feature standard thermocouple K connectors and are universally interchangeable with other temperature measurement systems. For different applications, there are several mounting possibilities of the sensors. TQC supplies magnet sensors, clamp sensors, wire & ring […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nWhile can coating the time-temperature cycle must be controlled carefully – Together with the cans the oven recorder winds through the conveying system in the oven and makes up a complete temperature profile. With help of paint cure specifications it determines the curing process by calculating the cure index for […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nSimple yet accurate digital TQC stopwatch, resolution to 1/100th of a second. Split times, built-in alarm. Clear display with large digits. nUltra flat and robust water- and shockproof design, complete with carrying cord. nIndispensable for viscosity measurements. n n n n[/su_expand]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Tripod Stand for Viscosity Cup nThe TQC Tripod Stand for Viscosity Cup is a stand that is easy to level with the adjustable feet of the unit and the built-in spirit level. The ring is made of stainless steel, the legs are made of stainless steel and the feet PVC. […]
N/A
Product successfully added to the Quote List
Temperature Control Jacket
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n TEMPERATURE CONTROL JACKET FOR VISCOSITY CUP nThe TQC Temperature Control Jacket for Viscosity Cup is a double jacketed casing of anodized aluminum with built-in spirit level to bring the viscosity beaker to the required temperature with cooled and heated liquids. Supplied with glass plate and tube connection. n nStandards: ASTM […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Viscosity Calculator is an indicative conversion table relating viscosity (in Cst) to flow time of different cups. Printed on the front is the No.4 complying with BS-NF-ASTM-Din and Zahn 2, on the back ISO no.’s 3-4-5-6 and Zahn 3 as well as the Gardner viscometer. n nStandards: ASTM […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Viscosity Cups Afnor nThe TQC AFNOR Viscosity Cups are a range of titanium anodized aluminum viscosity cups. Laboratory type, to be used with stand, to measure the viscosity of lacquers, paint and other liquids. n nStandards: NF T030-014 n n[/su_expand]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Lory Cup is designed for quick measurements on location or during production processes. The bottom of this cup is provided with a small hole and needle point. The product measured will flow out of the small hole and as soon as the needle point appears during this process, […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Viscosity Cup DIN 53211 with Interchangeable Nozzle n n n nThe TQC Viscosity Cup DIN 53211 with Interchangeable Nozzle consist of a wide range viscosity cups to measure the viscosity of paint, lacquers and other fluids. Very precize, with fixed stainless steel nozzle. n n nThe TQC Viscosity Cup DIN […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Viscosity Cup ASTM D1200 Ford n n n nThe TQC Viscosity Cup ASTM D1200 Ford is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel nozzle (inner cavity). n nThe viscosity cups are suitable for laboratory use with a stand. Widely used for measuring […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Viscosity Cup ASTM D1200 Immersion Ford n n n nThe TQC Viscosity Cup Immersion Ford is a range of titanium anodized aluminum or stainless steel (SS303) viscosity cups with stainless steel inner cavity fixed nozzle and handle. n nIdeal for measuring coatings and other fluids during application or production.. n […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Viscosity Cup ISO 2431 n n n nThe TQC Viscosity Cup ISO 2431 is a range of titanium anodized aluminum or stainless steel (SS303) viscosity cups with fixed stainless steel nozzle (inner cavity). n nLaboratory type, to be used with stand, to measure the viscosity of lacquers, paint and other […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Viscosity Cup ISO 2431 Immersion nThe TQC Viscosity Cup ISO 2431 Immersion is a range of titanium anodized aluminum or stainless steel (SS303) viscosity cups with fixed stainless steel nozzle (inner cavity) and handle. n nInner dimensions similar to ISO 2431. Ideal for measuring coatings and other fluids during application […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Viscosity Cup DIN 53211 n n nThe TQC Viscosity Cup DIN 53211 consist of a wide range viscosity cups to measure the viscosity of paint, lacquers and other fluids. Very precise, with fixed stainless steel nozzle. n n nThe TQC Viscosity Cup DIN 53211 is available in titanium anodized aluminium […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Viscosity Cup DIN 53211 Immersion nThe TQC Viscosity Cup DIN 53211 Immersion is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel (SS303) nozzle (inner cavity) and handle. Inner dimensions similar to DIN 53211. Ideal for measuring coatings and other fluids during application or […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Shore Hardness Test Block Kit with different values of hardness. As a reference check it will indicate if a durometer is operating within tolerances. The individual test blocks are provided with serial numbers to guarantee incontestable identification. Comes with custom made carrying case. n nComplies with: DIN 53505, […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n Viscosity Cup ASTM D1084 D4212 Immersion Zahn nThe TQC Viscosity Cup ASTM D1084 D4212 Immersion Zahn is a range of stainless steel (SS303) viscosity cups with fixed stainless steel inner cavity nozzle and handle. Ideal for measuring coatings and other fluids during application or production. n nStandards: ASTM D4212, ASTM […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nSimple, portable instrument for testing the hardness of materials acc. to ASTM D2583. Originally called the Barber-Colman Impressor, the Barcol impressor was developed by Walter Colman as a hand-held, portable means of assessing the hardness of a material during World War II. The United States Army Air Corps required a […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nInstrument for testing the quality of concrete and other construction materials according to UNI EN 12504-2 and ASTM C805. The recoil-force of the automatic hammer is displayed on the scale and indicates the strength of the concrete. n nFor analysing concretes with a minimum resistance of 10 N/mm2 to values […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe Scrub Abrasion and Washability Tester is used to test the resistence of paint, varnish or coatings to scratching, wearing, and color loss due to wet or dry abrasion, by simulating everyday wear from cleaning actions or general use. n nThe test is either used as a “pass or fail” […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nOur new TQC Knock-out test panels are designed to minimize the build-up of paint on the panel edges because of the knock-out frames. Because of the 4 mm holes in the knock-out frames it is easy to hang the panels horizontally or vertically without leaving any marks. n nAll our […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Sheen Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the damping time of a pendulum oscillating on a sample indicates the hardness. n nThe Pendulum […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nTQC Film Applicator with 3 reservoirs. Ideal for applying paint with use of a TQC Automatic Film Applicator or Drying Time Recorder. This applicator can apply 2 predefined thicknesses, 90 and 150µm n n n n[/su_expand]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nTQC Wire bar applicator with a film width of 310 mm and available in ranges from 4 to 200 µm nThe Wire bar or spiral bar / drawdown rod applicator is ideal for applying a film on thin materials such as sheets or plastic. Also works on flexible substrates, and […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nA wide range of consistent test charts for testing physical properties of coating, lacquers and inks. Suitable for determining hiding power, opacity and spreading rate. They come in a variety of dimensions from DIN A6 up to and including DIN A4. All charts are film laminated for an excellent solvent […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nSpecial 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the user two apply 2 layers of coating simultaneously with the same thickness. Ideally for use in combination with the TQC Automatic Film Applicators and TQC Abrasion- & Scrub testers. n n[/su_expand]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Wet Film Comb made of plastic, to measure wet film thickness between 25 and 900µm. The TQC Wet Film Comb is designed as a disposable thickness gauge. It can be kept as a record of wet film thickness measurement for ISO or customer requirements. One side of the […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThis handy, robust and easy to use TQC coating thickness gauge is ideal for measurement tasks in various industries and paint applications. This compact meter allows measurement of painted objects, or other corrosion protective layer thicknesses, with accuracy measured in both Fe (iron or steel) and NFe (aluminum, copper, brass […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nRectangular promotion measuring comb with a range of 25 to 2032 µm. Made of top-quality, weather-resistant aluminum. Special printing possible with larger orders. n nStandards: ISO 2808 n n n n n n n n[/su_expand]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nTQC Sheen Automatic film applicator provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors. n Reproducible nVariations in speed, pressure and direction of draw down cause irregularities. Other factors that […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nRevolutionary apparatus for testing the resistivity of coatings at various stages of deformation in accordance with ISO 1520. The built in gear-box minimizes the manual force which is required to deform the test panel, allowing to perform a smooth deformation. The degree or deformation is digitally displayed at a resolution […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several different applications. n nStandards: ISO 2808, JIS Z2371, ГОСТ Р 51694 n n n n […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Grindometers or Fineness of Grind Gauges are precision instruments to determine particle size and fineness of many materials like paints, lacquers, pigments, filler, chocolate etc.. n nMost TQC Grindometers have double grooves with graded slopes graduated in three different parameters: µm (microns), NS (Hegman) and PCU (North). Gauge […]
[su_expand text_color=”#2f2f2f” link_color=”#b41826″ link_style=”underlined”] n nThe TQC Sheen Automatic Cupping Tester allows to perform a cupping (Erichsen / Dent) test on coated steel panels to define the resistance of paint, varnish or related products to cracking and/or detachment from a metal substrate when subjected to gradual deformation by indentation under standard conditions. n nThe test […]
